Picket Fencing Gate

1 x Gate Leaf

Posts (if selected)

2 x Hinges and

1 x Thumb Latch

Important: Things to take into consideration when reading the below.

1) Do you need any vertical posts to attach the gate to?? In most cases, yes, but sometimes our gates are being fitted between existing door frames.

2) If ordering vertical posts, please remember to subtract the posts from your overall gap. Our vertical posts are 75mm square. See the example below.

3) Remember the clearance required to stop the gate fouling on the vertical posts. We allow for 10mm either side so 20mm overall.

Selecting Post Options = Each post is 75mm square.

Tekplas offers three options: No posts, one post, or two posts with your gate. This gives you flexibility when ordering the gate for every scenario. We have some written examples and some picture examples.

Example 1) No posts required. If you have a gap between your current vertical posts/Current Doorway of 1000mm, you need to order a gate at 980mm this includes the 20mm of clearance.

Example 2) 1 vertical post required. If you have a gap of 1000mm, you need to fill it with a gate and 1 x vertical post. You need to minus 75mm for the post and 20mm of clearance. So you need a gate width of 905mm.

Example 3) 2 Vertical posts are required. If you have a gap of 1000mm, you need to fill with a gate and 2 x vertical posts. You need to minus 150mm for the posts and 20mm of clearance. So you need a gate width of 830mm.

We do offer a fitting service, prices vary depending on your location. Were have two fitting locations we work from the main factory in Camberley/Surrey and Southend/Essex. Please contact us

3 x Colour Options

3 x Height Options

3 x Post Options

This product comes with instructions. The gate is pre-assembled, but the gate will need to be hung once everything is set up. You’ll need to ensure the correct clearance beneath the gate and between the posts. Please note we don't pre-fit the gate, as if the floor is uneven, the pre-fitted gate from the factory might not work as intended in another location.

Tekplas PVC Fencing Aftercare Guide To keep your Tekplas fencing looking fresh and performing well, we recommend carrying out maintenance twice a year – once at the start of spring and again at the end of summer.

Step 1: General Cleaning

• Hose down the fencing to remove surface dirt and grit.
• Wash thoroughly with hot soapy water and a soft sponge. This removes build-up from winter weather or heavy rainfall.

Step 2: PVC Surface Treatment

• Once dry, use a PVC solvent cleaner to restore the finish. We highly recommend Everbuild PVC Solvent Cleaner for best results.
• Spray directly onto the fencing and wipe with a clean cloth. This helps maintain the appearance, especially for coloured fencing, by protecting against fading from UV exposure. It takes many years of full sunlight, but following these steps will help to prevent this happening.

Why Maintain Your PVC Fencing?

Unlike timber, PVC won’t rot, absorb water, or dry out and split during the summer months. It also won’t need repainting like traditional wooden fencing,
saving you time and ongoing maintenance costs. With just a small amount of care, your Tekplas fencing will continue to look great and perform well for many years to come.