Garden Path Gate Slatted | Flat Top | W: 600 - 1200mm, H: 900mm

1 x Gate Leaf

2 x Posts & Post Caps

1 x Ring Latch and Screws For Fixing

2 x Hinges and Screws For Fixing

We can also provide at an extra cost, drop down bolts, brenton Pad Bolts, Coded Locks and Keylocks. Please see our gate accessories page.

Measuring Your Gate Opening

To ensure an accurate fit, we need to know the total gap, including the posts. Here’s how to measure:

Measure the Total Gap: Measure the distance from wall to wall, or from wall to fence. Be sure to
measure at the top, middle, and bottom of the opening to account for any variations.

Provide the Smallest Measurement: After measuring, record the smallest measurement from top, middle,
and bottom in the "Total Gap" box. This will ensure a
precise fit for your gate.

Post Thickness and Clearance:
Once we receive the smallest measurement, we will subtract the thickness of the posts and include the appropriate clearance for a proper fit.

If you're unsure about the measurements or need assistance, please don’t hesitate to contact us, and we’ll guide you through the process.

Existing Posts: If you plan to keep your existing posts, or one of them, let us know. Our standard gate package includes two posts, unless you specifically
request otherwise.

We have two main areas that we fit directly
through Tekplas with our own fitters.

We also have a fitters page for 3rd party fitters
if your outside of our area. We are situated in Southeast England. These are our prices only these aren't prices for the 3rd party
fitters.

Our Local Areas are below:
Camberley & Southend

All Garden/Driveway Gates:
Fuel & Travel Local Area = Free = Up to 15
miles

Fuel & Travel Outside Of Our Local Area 15-40
Miles £30.00

Fuel & Travel Outside Of Our Local Area 40 –
60 Miles £50.00

Single Gate Install £110.00 = No Existing Gate To
Remove

Single Gate Install £110.00 = Remove Existing
Gate And Dispose of an Extra £30.00

Standard Gate Height 880mm/88cm

Plastic Posts 75mm x 75mm x 900mm/90cm

We offer 4 different colours and 3 different gate hardware choices.

Our gates in this width range are made up of a 15mm thick vertical panel and a 15mm thick back bracing bar. Both profiles have internal webs for structural strength.

Full instructions are supplied with each gate explaining exactly how to install our gates correctly, we also have a video on Youtube please us this link

Spring Gate Maintenance Tips: To keep your gate looking fresh and working properly, we recommend
following these simple steps.

Clean Your Gate: Begin by hosing down your gate to remove any dirt or grit that may have built up
during the winter months or from heavy rain. Then, wash the gate using hot, soapy water and a sponge. This will help remove any stubborn residue.

Use a PVC Solvent Cleaner: After the gate has dried, apply a PVC solvent cleaner to maintain its appearance. Over the years, we’ve found that Everbuild PVC Solvent Cleaner works best. Simply spray it onto the gate and wipe it over with a clean cloth. This will not only help keep your gate looking
great, but also help protect the color of the gate, especially if it's exposed to sunlight.

Protect Against the Sun: If your gate is in full sun year-round, we recommend going a step further by
applying a coat of clear Danish oil using a cloth. Many Danish oils designed for outdoor use contain UV additives, which will provide extra protection for your gate. Our gates are made from high-quality PVC, which already includes UV protection. While it takes many years for PVC to fade, following these extra steps will help preserve its appearance.

Maintain Gate Hardware: Don’t forget to maintain your gate’s hardware, including the hinges, ring
latch, and locks. Simply apply some oil to a cloth and wipe it over the hardware, paying extra attention to the hinge joints. This will help protect against the weather and ensure everything continues to
work smoothly.

By following these easy steps, you’ll keep your gate looking great and functioning properly for years to come.